OILFIELD - Secondary Containment

ULTRA TRACK PANS

Ultra-Track Pans have been designed to provide spill containment at industrial rail sidings and locomotive maintenance facilities. Available in virtually any length, Ultra-Track Pans may be used to collect small spills and leaks OR to capture and channel off significant spills caused by defective equipment or a major overflow.

Unlike carbon steel track pans, Ultra-Track Pans will not rust or corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun.

CALL US ANYTIME 8 A.M. - 5 P.M., MON-FRI • AFTER HOURS, PLEASE LEAVE MESSAGE.
Toll Free: (888) 748-5463
Capture Hazardous Spills From Railroad Tanker Cars
ULTRA TRACK PANS
Part Number
9566
9580
9576
9581
Description
Center Track Pan w/Grates
Center Track Pan w/Grates
Side Track Pan w/Grates
Cover for Side Track Pan
Dimensions
53.5" x 53.5" x 6"
55" x 52.5"
53.5" x 27.5" x 6"
55" x 28.25"
Weight
112 lbs
24 lbs
58 lbs
11 lbs
Capacity
18 Gal
 
58 Gal
 
Includes
2 Bulkhead Fittings
4 Gaskets
2 Grates
 
1 Bulkhead Fittings
2 Gaskets
1 Grates
 

ULTRA COMPLETE TRACK PAN SYSTEMS
Part Number
Includes
9595
2 Center Pans, 4 Side Pans
9596
2 Center Pans, 4 Side Pans, Covers

40' Systems
Part Number
Includes
9589
9 Center Pans, 18 Side Pans
9590
9 Center Pans, 18 Side Pans, Covers

60' Systems
Part Number
Includes
9592
14 Center Pans, 28 Side Pans
9593
14 Center Pans, 28 Side Pans, Covers

Installation | Center Track Pan | Side Track Pan | Below Grade Piping | Below Grade Piping | Rail Height Worksheed
Track Pan Regulations | Center Track Pan

Options
Part Number
Includes
9584
Rebar Fasteners w/Protective Caps (20 pk)
9559
3" Dia. Bulkhead Fitting (for below grade piping)
9586
Sorbent Mats, Center Pan (2/set), 10 pk
9585
Sorbent Mats, Side Pan (2/set), 20 pk
9571
Grate Only for Center Pan (Left)
9572
Grate Only for Center Pan (Right)
9573
Grate Only for Side Pan

Ultra Track Pans

  • Ultra-Track Pans have been designed to provide spill containment at industrial rail sidings and locomotive maintenance facilities. Available in virtually any length, Ultra-Track Pans may be used to collect small spills and leaks OR to capture and channel off significant spills caused by defective equipment or a major overflow.
  • Prevent Costly Cleanup and Regulatory Fines
  • Modular Design - Center and Side Pans are 53.5" long; containment areas can be easily assembled to any length desired
  • All-polyethylene Construction - Rugged Track Pans withstand harsh chemicals and are designed to function in temperatures ranging from -40°F to +140°F
  • Sealed System - Polyethylene gaskets keep spills from falling between the rails and Pans.
  • Trucks and other vehicles can drive over Track Pans with grates in place*
  • Economical, easy to install.

Modular Track Pan

  • Modular Track Pan design can be customized to meet your specific needs.
  • Optional Track Pan Covers Keep Rainwater Out of the Pans, Providing Effective Stormwater Management.
  • Polyethylene Covers are left in place until the railcar(s) arrive to be off-loaded or loaded. Lightweight covers mechanically lock into the polyethylene decking and will not blow off in windy conditions.
  • Unique stormwater feature is designed to eliminate "pooling" of rain that falls on top of the Center Pan Covers; rain is channeled onto the ballast between the tracks, stays out of the Pans.

Benefits

  • Ultra-Track Pans Are Available In Two (2) Models: Track Pans and Grates, No Covers & Track Pans with Grates and Covers
  • Low Maintenance — unlike carbon steel track pans, Ultra-Track Pans will not rust or corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun.
  • Low Cost Installation — Lightweight Track Pans can be easily installed without heavy lifting equipment, i.e., forklifts, cranes, backhoes, etc. Minimal tools and labor required.
  • Slip Resistant Surfaces — Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily.
  • Long Work Life — Estimated to perform 20-30 years; longer than fiberglass pans.
  • Meets SPCC and EPA Stormwater Management Regulations.
  • Also meets New York State Chemical Bulk Storage Regulation Section 599.17c — Secondary Containment for Transfer Stations.
* To drive over Track Pans, firm footing must be beneath the Pans; also must "ramp up" to Side Pans with asphalt or concrete.
Installation | Center Track Pan | Side Track Pan | Below Grade Piping | Below Grade Piping | Rail Height Worksheed
Track Pan Regulations | Center Track Pan
Our professional installation crews consider your safety procedures a top priority. Our outstanding record testifies to our commitment to work safety. To learn more about the Unit Liner commitment to safety Click Here.