Polyurea Applications - Marine & Boat

Marine & Boat Industry

Exposure to nature's harsh and unforgiving marine elements (salt water, moisture, air and extreme temperature) will inevitably corrode and degrade both onshore and offshore infrastructure, vessels, and equipment. Rust, abrasive wear and tear, and slippery surfaces present significant challenges for maintaining safety and protecting your valuable investments.

ULC's high-performance polyurea product provide the ultimate protection for the Marine and Boat industry. These innovative polyurea coatings create a tough barrier that protect a variety of serfaces (metals, wood, concrete, fiberglass, floatation foam). Polyurea is an industrial strength polymer coating that creates an airtight, impermeable seal that locks out the marine elements.


Marine & Boat Industry Solutions

  • Port, shipyard, and marina corrosion protection.
  • Chemical-resistant lining for storage tanks, pipes and cargo areas.
  • Boat hull impact and abrasion protection.
  • Non-slip or non-skid deck or floor coating.
  • Corrosion, abrasion wear and tear protection in cargo handling areas.
  • Encapsulation of dock floats.
  • Aquacture tank lining.
  • Marine animal enclosure and training tank lining.
  • Coat or restore coating of pilings above and below water.
Unit Liner Company, Call Toll Free at 1-800-633-4603

Featured Industry Solutions

K5™

K5™ is an ultra high-strength, high-elongation polyurea, originally developed as a resilient blast restant polymer. Soon after, it was discovered that K5™ is exceptionally resistant to abrasion, compared to other spray applied coatings. K5™ can be sprayed on to veirtually any surface configuration, at any thickness, Therefore, it can be selectively applied to high wear areas.

HT 100F™

Polyshield HT-100F™ is a fast-set, high-performance, spray-applied, plural-component, pure polyurea elastomer. This system is based on amine-terminanted polether resins, amine chain extenders, and prepolymers. It provides a cost-effective, flexible, tough, resilient monolithic membrane with water and chemical resistance. Polyshield HT-100F® is an excellent choice of elastomer to topcoat geo-textile fabrics for primary or secondary containment.

Polyshield HT SL™

Polyshield HT SL™ is a fast-set, high-performance, spray-applied, plural-component, pure polyurea elastomer. This system is based on amine-terminated polyther resins, amine chain extenders. and prepolymers. It provides a cost-effective, flexible, tough, resilient monolithic membrane with water and chemical resistance.

ULC has over 40 unique poluyrea elastomer coatings with a wide range of physical properties to meet your specific project requiremens. ULC only produces 100% solids, pure polyurea coatings that contain no VOCs, solvents, or harmful ozone depleting ingredients. Our knowledgeable taem of industry experts will work closely with you from your project's beginning to the end, providing reliable coatings solutions, SSPC/NACE standards and project specifications.

 

Dry Properties
& Test Methods
Polyshield
HT™
Polysheld
HT™ 100F
K5™
Tensile Strength, psi
ASTM D412
± 4,400 psi
>4,250 psi
±5,500 psi
Elongation
ASTM D 412
± 400%
>350%
±300%
Tear Resistance, pli
ASTM D 624
430 pli
±50
420 pli
±50
490 pli
avg.
Shore D Hardness
ASTM D 2240
45 ± 5 D
47 ± 5 D
57 ± 5 D
Abrasion Resistance
ASTM D 4060
H 18 Wheel
92 mg loss
H 18 Wheel
161 mg loss
H 18 Wheel
33 mg loss
Aplication
Temperature
< 70° to >
100°F
< 70° to >
100°F
< 70° to >
100°F
Service Temperature
-60° to
+250°F
-60° to
+250°F
-40° to
+200°F
Return to Service
24 Hours
24 Hours
24 Hours
Our professional installation crews consider your safety procedures a top priority. Our outstanding record testifies to our commitment to work safety. To learn more about the Unit Liner commitment to safety Click Here.