Polyurea Applications - Waterproofing

Waterproofing Industry

Each year, corrosion and water damage affect every corner of the globe. Annual damage costs run in the hundreds of billions of dollars. Studies show the total annual estimated direct cost of corrosion in just hte U.S. is a staggering $276 Billion, approximately 3.1% of the nation's Gross Domestic Product (U.S. Federal Highway Administration & NACE International). The good news is much of this damage is preventable.

Industrial waterproofing provides critical protection to facilities and structures that are vulnerable to the natural threat of intense water damage, flooding, or corrosion. ULC's advanced polyurea coatings protect a variety of construction materials (various metals, concrete, wood, glass, polyurethane foam, geo-textile fabric, and more). These durabel elastomeric coatings form an impermeable barrier that is resistant to corrosion, water and many chamicals. Investing in the right coating technology will greatly extend your investment's service life at a fraction of the replacement cost.

 

Waterproofing & Corrosion Protection Solutions

  • Protecting metal structures, bridges, storage tanks & pipes.
  • Coating equipment, casted parts, molds or intricate pieces.
  • Waterproofing roofs, foundations, decks and walkways.
  • Waterproofing and protecting polyurethane and EPS foam
  • Water retention or decorative ponds.
Unit Liner Company, Call Toll Free at 1-800-633-4603

Featured Industry Solutions

HT™ 100F UB

HT™ 100F UB is a high tensile, high elongation, high build, fast-set elastomer, specifically formulated to provide a tenacious bond to certain thermoset plastic surfaces. Unlike most spray-applied polyureas, HT™ 100F UB has the unique polymeric substrates, both new and aged, typically without the use of primers or extensive surface preparation. It provides a cost effective, flexible, tough, resilient monolithic membrane with water and chemical resistance.

Polyshield HT™ SL

Polyshield HT™ SLis a fast-set, high-performance, spray-applied, plural-component, pure polyurea elastomer. This system is based on amine-terminated plolyether resins, amine chain extenders and prepolymers. It provides a cost-effective flexible, tough, resilient monolithic membrane with water and chemical resistance.

ElastaFlex™ III

ElastaFlex™ III is a third generation pure polyurea waterproofing elastomer. This economical polymer exhibits high tensile strength and very high elongation (>900%), to bridge stress cracks in concrete and other substates. It contains no tar, asphalt, or VOCS. It can be wlaked on in minutes and is usually back-filled in less than one houre. ElastaFlex™ III is an excellent choice of elastomer to topcoat geo-textile fabrics for primary or secondary containment.

ULC has over 40 unique polyurea elastomer coatins with a wide range of physical properties to meet your specific project requirement. ULC only produces 100% solids, pure polyurea coatins that contain no VOCs, solvents, or harmful ozone depleting ingredients. Our knowledgeable team of industry experts will work closely with you from your project's beginning to the end, providing reliable coatin solutions, SSPC/NACE standards and project specifications.

 

Dry Properties
& Test Methods
ElastaFlex™ III
UB
Polyshield
HT™ SL
HT™ 100F
UB
Tensile Strength, psi
ASTM D412
± 2,600 psi
± 4,400 psi
± 3,900 psi
Elongation
ASTM D 412
± 930%
± 400%
> 325%
Tear Resistance, pli
ASTM D 624
350 pli
± 50
430 pli
± 50
370 pli
± 50
Shore D Hardness
ASTM D 2240
35 ± 5 D
45 ± 5 D
50 ± 5 D
Abrasion Resistance
ASTM D 4060
n/a
H 18 Wheel
92 mg loss
n/a
Aplication
Temperature
< 70° to >
100°F
< 70° to >
100°F
< 70° to >
100°F
Service Temperature
-60° to
+200°F
-60° to
+250°F
-50° to
+200°F
Return to Service
48 Hours
24 Hours
24 Hours
Our professional installation crews consider your safety procedures a top priority. Our outstanding record testifies to our commitment to work safety. To learn more about the Unit Liner commitment to safety Click Here.